Index
Step 1 getting started
Step 2 an easy step
Step 3 choose your modem and name your connection
Step 4 dial-up number
Step 5 completed the main connection
Step 6 properties
Step 7 Server settings
Step 8 Tcp/ip
Step 9 Scripts
Step 10 Finally ready to connect
Introduction
This document takes for granted that you have already installed a modem and have got windows 98 installed on your system and you have dial up connections on the start menu as follows:
program\accessories\communications
Start the dial up connection by left clicking:
program\accessories\communications\dial-up networking
and when the new connection "wizzard" has started proceed to the next
step.
(if this isn't the first time you connect a dial-up network this might
not
auto start then you will have to click new connection)
Step 2 is easy just click the next button to proceed to the next step.
Step 3 choose your modem and name your connection
In step 3 you write Mathlan in the top dialogue bar, then choose your
modem in the lower dialogue bar
and then click the next button to proceed to the next
step.
Enter your area code and the dial up number which in our case is 08
for area code
and 7919007 as phone number and then choose your country code
which should be sweden and press the next button to proceed to the
next
step.
Step 5 Completed the main connection
Click the finish button at the bottom of the page and proceed to the
next
step.
Right click your new connection in the dial-up network window and choose
properties
and then continue to the next step.
Click the Server Types tab and make sure the type of dial up server
is:
"ppp: Internet, Windows NT Server, Windows 98"
then check so the allowed network protocols are only Tcp/ip uncheck
the other protocols
and click the button marked Tcp/ip settings and then proceed to the
next
step.
Make sure server assigned ip address is chosen
then mark specify name server addresses
then add the primary DNS 130.237.41.27
and also add 130.237.72.201 as secondary DNS. then click the ok button
and proceed to the next step
Click the scripting tab and browse for your script either you have made
yourself or this one i have made, and then
click the ok button and proceed to the next step
Step 10 Finally ready to connect
Click on your connection that should now be in:
program\accessories\communications\dial-up networking
Then fill in your user name and password and click the connect button.
You should now be connecting to Math lan if you have followed the instructions
correctly,
and installed your modem properly.
by Robin clements email robin@math.kth.se or robin@vortexq.com